The Broadcom ® AFBR-S50LV85D is a multipixel optical distance and motion measurement sensor module that is based on the optical Time-of-Flight principle.
Frame rates of up to 3 kHz are supported, depending on the microcontroller, the data streaming mode, and the number of evaluated pixels. For frame rates of up to 100 Hz, a dual frequency (2f) mode is used to achieve an unambiguous range of up to 100m.
SUPPLIER: Broadcom
Key Features
◆ Very fast measurement rates of up to 3 kHz
◆ Operation up to 200 klx
◆ Integrated calibrated clock source
◆ Accuracy error typically below ± 1%
◆ Unambiguous range up to 100m in 2f mode
◆ Reference pixel for system health monitoring
◆ Laser Class 1 eye safe ready
Parameters
◆ Single voltage supply of 5V
◆ Typical current consumption of 33 mA
◆ Integrated 850-nm laser light source
◆ Typical optical peak output power of 40 mW
◆ Typical optical average output power < 0.6 mW
◆ Receiver with 32 pixels
◆ Field of view per pixel of 1.55° × 1.55°
◆ Transmitter beam width of 2° × 2° to illuminate typically 1 to 3 pixels
◆ Distance range up to 30m and beyond
◆ Operation temperature (ambient): –20°C to 70°C
◆ SPI digital interface up to 25 MHz
◆ Size without pins: L × W × H: 12.4 mm × 7.6 mm × 7.9 mm